Dissolvable Battery to Power Transient Implantable Devices
 

Dissolvable Battery to Power Transient Implantable Devices
http://www.medgadget.com/wp-content/...le-battery.jpg

We’ve seen the development of dissolvable brain implants and other so-called “transient electronics” that are slowly washed away and disappear some time after implantation. One thing missing but required for these devices to be fully implantable and dissolvable is a battery that does the same at about the same rate. **w researchers at*Iowa State University are reporting on a lithium-ion battery that provides about 2.5 volts of power before disintegrating in water in about thirty minutes.

Though the power produced by this battery is only sufficient*to run*a calculator for about fifteen minutes, the proof-of-concept is e**ugh to point to great potential for diag**stic and therapeutic devices that don’t require a visit back to the doctor for explantation. In particular, brain implants would probably benefit the most since their removal can be particularly challenging and dangerous.

From the study:

The battery takes advantage of a close variation of the active materials used in conventional Li-ion batteries and can achieve and maintain a potential of >2.5 V. All materials are deposited form polymer-based emulsions and the transiency is achieved through a hybrid approach of redispersion of insoluble, and dissolution of soluble components in approximately 30 min.

Study in Journal of Polymer Science, Part B: Polymer Physics: Physical–chemical hybrid transiency: A fully transient li-ion battery based on insoluble active materials…

More from Iowa State…

This post Dissolvable Battery to Power Transient Implantable Devices appeared first on Medgadget.

http://feeds.feedburner.com/~ff/Medgadget?d=yIl2AUoC8zA http://feeds.feedburner.com/~ff/Medgadget?d=qj6IDK7rITs http://feeds.feedburner.com/~ff/Medg...es:gIN9vFwOqvQ
http://feeds.feedburner.com/~r/Medgadget/~4/Uq2yWOmoYn4