ryan

ryan (https://hameed.nwar.uk/vb/index.php)
-   اخبار التقنية (https://hameed.nwar.uk/vb/forumdisplay.php?f=16)
-   -   Classic and Modern Buckle Band Parts Let Third-Party Bands Connect to Apple Watch [iO (https://hameed.nwar.uk/vb/showthread.php?t=1364221)

ahlam1399 05-05-2015 12:51 AM

Classic and Modern Buckle Band Parts Let Third-Party Bands Connect to Apple Watch [iO
 
There are few third-party band options available for the Apple Watch at the current point in time given that it just launched a week and a half ago, but those of you who purchased a stainless steel Apple Watch with a Classic Buckle or Modern Buckle band can use the components from those bands to connect standard watch bands to your Apple Watch devices.

In a newly published video, Lewis Hilsenteger of Unbox Therapy walks through the process of using the parts in the Classic Buckle band to connect a 22mm third-party watch band to the Apple Watch.


As it turns out, there are two small pentalobe screws holding the pin component of the Classic Buckle together, so with a pentalobe screwdriver, the portion of the band that connects to the Apple Watch can be disassembled, slid into a standard pin-based watch band, and reassembled.

http://cdn.macrumors.com/article-new...le-800x392.jpg
The Modern Buckle and the Classic Buckle are the only two bands that have a pin-based connector built-in, so those of you who want to use different watch bands with your Apple Watch devices will need to either purchase one of the models that comes with a Classic Buckle band or purchase a Classic Buckle band separately for $149 (estimated to ship out in May). The Modern Buckle has the same connector, but Modern Buckle Apple Watches have **t yet shipped out and those bands are listed as "Currently Unavailable" in the online Apple Store.

Along with a compatible Apple Watch band, a tiny pentalobe screwdriver is also required to swap out the band, but those are available at little cost. With a Classic Buckle and the screwdriver, making a swap is as uncomplicated as simply removing two screws, pulling apart the connector, sticking the pieces into a**ther watch band, and putting it back together again.http://rss.feedsportal.com/c/35070/f...5/sc/23/mf.gif


http://da.feedsportal.com/r/22485231...23/rc/1/rc.img
http://da.feedsportal.com/r/22485231...23/rc/2/rc.img
http://da.feedsportal.com/r/22485231...23/rc/3/rc.img

http://da.feedsportal.com/r/22485231...5/sc/23/a2.imghttp://pi.feedsportal.com/r/22485231.../sc/23/a2t.imghttp://feeds.feedburner.com/~ff/MacR...?d=yIl2AUoC8zA http://feeds.feedburner.com/~ff/MacR...?d=6W8y8wAjSf4
http://feeds.feedburner.com/~r/MacRu...~4/9ebbAmMoANU

أكثر...


الساعة الآن 02:05 AM

Powered by vBulletin® Copyright ©2000 - 2026, Jelsoft Enterprises Ltd. TranZ By Almuhajir
This Forum used Arshfny Mod by islam servant