OpenCore on the Mac Pro

The solution works, by adding the BlessOveridde entry:
View attachment 893087

And then once I select the EFI, rEFInd shows:
View attachment 893088

Thank you very much.

Now unfortunately my HEVC decode acceleration is not working.
Should I inject the WEG-GREEN kext into the OC/Kext?
Will relook at H98’s guide hopefully can find a solution.

HEVC decode works now after following instruction from H98’s guide:

Full HWAccel achieved now! Everything are covered in the OpenCore threads. The step by step tutorial is at here, but I strongly recommend you go through the whole thread before you do anything. https://forums.macrumors.com/threads/opencore-on-the-mac-pro.2207814/ The same method works in…

forums.macrumors.com

I edit my config file to add following:
– Lilu and WEG kext
– NVRAM boot args (shikigva)
– SMBIOS board Id

Thanks H98 for such a great guide, btw you can update your guide for information on boot picker for VEGA as confirm it works for my VEGA 64.

I attached my config (based on open core 0.5.5 RELEASE default), but please remove the ‘BlessOverride’ if you don’t use rEFInd or modify the path as required.

Thanks all